MSM400 ULTRASONIC SOLIDS MONITORING AND CONTROL SYSTEM

NTD Nhà Phân Phối Sản Phẩm Mobrey Tại Việt Nam

 

Mr.The Thuc  (+84)-988983298

 

Skype: thethuc1

 

Zalo: 0988983298

 

Email : nt.thuc@ntd-automation.com

 

Web: ntd-automation.com

• FEATURES & BENEFITS
   
• DOCUMENTATION
   
• SUPPORT

• Continuous sludge discharge monitor for up to 50% suspended solids
•  4–20 mA / HART output signal of measured value
• Two SPDT relays for control and alarm
• Rugged 316 stainless steel sensors for in-tank mounting
• Choice of flanged pipeline sensors for in-line density measurement
• Blanket level detection for primary and secondary sludge and industrial slurries
• Provides the automatic control sequence to start a pump or control a valve for sludge or settled product removal
• Gives a bright and clear indication of the measured value in poor light conditions

SPECIFICATION

Housing Material

ABS enclosure with clear polycarbonate lid.

Operating Pressure

Up to 1523 psi (105 bar)

Power Supply

AC mains and DC terminal connections on control unit for external supply.Auto-selection of AC or DC supply,allowing back-up if one power supply fails.
AC supply: 115 or 230 Vac ±15% (switch selectable)
DC supply: 15 to 30 Vdc, 24 Vdc nominal

Output Signal
4-20 mA (default) or 0-20 mA, software selectable.
Two off SPDT (single-pole-double-throw) relays.

Display/Interface

Integral 32 x 122 pixels LCD with backlight, providing up to four lines of characters on control unit.

Ambiente Temperature

-22 to 131 °F (-30 to 55 °C) for control unit.

Operating Temperature

See Product Data Sheet for all sensor operating temperature ranges.